32 Channel Motion Sensor Dimming Stair Light Strip For the stair decoration DIY

Description

32 Channel LED Controller with Motion Sensor for Light Strip Stair Dimming
Light Indoor Motion Night light DC12V & 24V Flexible LED Strip for
The Stair
Product description:
Product name: 32-channel stair sensor
Voltage: DC12V/DC24V
Power: ≤350w
Channel: 32
Sensors: 2
Controller operation:
1 Long press for 3 seconds to set the number of lights on the stairs, click the button until all lights are on, up to 32 steps, long press again to confirm.
2 The blue light indicates that the serial number light is turned on
3 Touch the button to adjust the speed of turning off the lights on the controller. The higher the four gears, the slower the lights will turn on and turn off.
Installation Tips:
1 When the lamp is plugged into the controller, be sure to find the socket of the corresponding serial number
2 The controller and sensor can be hidden in the electric box
3 Be sure to connect the positive and negative poles, the red is the positive, the blue is the negative, and the low-voltage current is DC12-24V, not AC220V/110V
4 It is recommended to bury the line in advance and install the lights when the stairs are decorated.
5 The wiring needs to be disconnected, and the wiring cannot be plugged in to avoid short circuit
NOTE:
1-A/B sensors need to be installed at the entrance and exit of the stairs and face the human body.
2- The product is low voltage 12V-24V, need to connect transformer. Do not directly connect 220V, it will burn the controller.
3- The product is not waterproof.
Important
note: The positive and negative terminals of the power supply input of
the controller cannot be reversed, the red wire V+ is connected to the
positive electrode of the switching power supply, and the blue (or black
wire) V- is connected to the negative electrode of the switching power
supply.
Product package:
1. Only LED controller: 1pcs LED Controller + 2pcs sensor + 2pcs extension cord with SM JST Connector
Only light strip: 1 * 1m warm white/cool white/red/green/blue/yellow/ice blue/pink/purple（60leds/m，White PCB）(according to your choice)
3. Only Power Adapter： 20A 12V LED Power Adapter
4. Only wire：20/50/100m wire extend cable(according to your choice)